Gold's Gym Platinum User Manual Download

Page: 1 / 44

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

Model No. GGBE6958.0

Serial No.

Write the serial number in the

space above for future reference.

Serial Number Decal (under seat)

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you have

questions, or if parts are missing,

PLEASE DO NOT CONTACT THE

STORE; please contact

Customer Care.

IMPORTANT: You must note the

product model number and

serial number (see the drawing

above) before contacting us:

CALL TOLL-FREE:

1-877-776-4777

Mon.–Fri. 6 a.m.–6 p.m. MT

Sat. 8 a.m.–4 p.m. MT

ON THE WEB:

www.workoutwarehouse.com

USERʼS MANUAL

Visit our website at

www.workoutwarehouse.com

new products, prizes,

fitness tips, and much more!

Summary of Contents for Platinum













































Search results

Summary of Contents for Platinum

Reviews:

Related manuals for Platinum

Brands by name

Popular brands

Gold's Gym Platinum, User Manual

Search results

Summary of Contents for Platinum

Reviews:

Related manuals for Platinum

Brands by name

Popular brands