![background image](http://html.mh-extra.com/html/golds-gym/ggbe-1469-0/ggbe-1469-0_user-manual_2239738006.webp)
• To hire an authorized service technician to
assemble the weight bench in your home, call
1-800-445-2480.
• Assembly requires two persons.
• Because of its size and weight, assemble the
weight bench in the location where it will be
used. Make sure that there is enough clear-
ance to walk around the weight bench as you
assemble it.
• Place all parts in a cleared area and remove
the packing materials. Do not dispose of the
packing materials until you complete all
assembly steps.
• To identify small parts, see page 5.
• The following tools (not included) may be
required for assembly:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
6
ASSEMBLY
1.
Identify the Left Stabilizer (5) and the Left
Upright Base (55), which are marked with “Left”
stickers.
Orient the Left Stabilizer (5) so that the square
holes are facing the floor.
Attach the Left Upright Base (55) to the Left
Stabilizer (5) with two M10 x 50mm Carriage
Bolts (44) and two M10 Locknuts (40).
Do not
tighten the Locknuts yet.
Insert two M10 x 50mm Carriage Bolts (44)
upward into the remaining holes in the Left
Stabilizer (5).
Repeat this step with the Right Stabilizer (6)
and the Right Upright Base (56).
To make assembly easier, read the tips at
the top of this page before you begin
assembling the weight bench.
5
6
40
40
56
44
Square
Holes
44
55
1