15
USING THE CURL POST
Remove the 44mm Square Inner Cap (30) from the
Front Leg (3).
Next, insert the Curl Post (13) into the Front Leg (3)
and align one of the holes in the Curl Post with the
hole in the Front Leg. Then, tighten the Curl Knob
(26) into the Curl Post;
fully tighten the Curl
Knob.
When you are not using the Curl Pad (20), remove
the Curl Post (13) from the Front Leg (3) and slide it
onto the storage tube on the Right Stabilizer (6).
Press the 44mm Square Inner Cap (30) into the
Front Leg (3).
23
22
12
3
24
24
Weight
USING THE LEG LEVER
To use the Leg Lever (12), slide the desired weights
(not included) onto the Weight Tube (22). Secure
the weights with a Weight Clip (23).
The indicated Foam Pads (24) and Pad Tube (not
shown) can be attached in either of the two holes
near the top of the Front Leg (3). Choose the posi-
tion that is the most comfortable for you.
WARNING:
Do not place more
than 150 lbs. (68 kg) on the Weight Tube (22).
Secure the weights with a Weight Clip (23).
ADJUSTING THE WEIGHT RESTS
To use a barbell (not included) with the weight
bench, insert the two Weight Rests (33) into the
Uprights (8, 9) at the appropriate height. Rotate the
locking clips around the Uprights.
WARNING:
Always place both
Weight Rests (33) at the same height. Make
sure that the locking clips are securely
wrapped around the Uprights (8, 9).
33
8
9
Locking Clip
33
26
20
30
3
6
13