8
Component:
Br ake Har ness
-
#6
Location:
Fr om the br ake to the contr ol boar d.
See figure 7.
Function:
Provides connectivity between the br ake and the
freewheel switch.
Connections:
CN4 on the contr ol boar d. Refer to the wiring
diagram on page 11.
Failure Signs:
Scooter faults and will not move.
Tests:
Test for voltage and continuity. Check connectors.
Make sure the pins are not corroded and are seated properly.
Expected readings:
Continuity (less than 10 ohms).
Serviceable:
Replace as necessar y.
Component:
Console Boar d
-
#7
Figure 7. Control Board
Location:
Mounted inside the dash.
See figure 8.
Function:
Provides connectivity for the main har ness,
key switch, speed pot, throttle pot, battery meter, on/off
switch, horn, and horn button.
Connections:
Connections CN1
-
CN8. Refer to the
wiring diagram on page 11.
Failure Signs:
Scooter faults, will r un slowly or
not at all.
Meter and/or horn does not function.
Tests:
Test for voltage and continuity. Check
connectors.
Make sure the contacts are not corroded.
Expected readings:
Continuity (less than 10 ohms).
Serviceable:
Replace as necessar y.
Figure 8. Console Board
Component:
Thr ottle Pot (Potentiometer )
-
#8
Location:
Below the control panel.
See figure 9.
Function:
The thr ottle pot uses variable r esistance
to control speed and direction of travel by varying voltage.
Connections:
CN7 on the console boar d. Refer to the wiring
diagram on page 11.
Failure Signs:
Beep Codes #6 and #7.
Tests:
Test resistance across pins 1, 2, and 3 on the thr ottle pot.
Expected readings:
Depends on dir ection of deflection.
Serviceable:
Replace as necessar y.
Component:
Speed Pot (Potentiometer)
-
#9
Location:
Mounted on the control panel.
See figure 10.
Function:
The speed pot uses var iable r esistance to control
the speed of the scooter.
Connections:
CN8 on the console boar d. Refer to the wiring
Figure 9. Throttle Potentiometer
diagram on page 11.
Failure Signs:
Beep Code #7
Tests:
Call Tech Support
Expected readings:
Depends on speed pot position.
Serviceable:
Yes. Replace the speed pot.
Figure 10. Speed Pot
CN4
Summary of Contents for Buzzaround Carry On
Page 2: ...2 ...
