10
Component:
Off
-
Board Charger
-
NA,
(Not shown)
Location:
Stor ed inside a pouch on the seatback.
Function:
Charges the batter y pack.
Connections:
Connects to the XLR char ger por t on the tiller or back side of the batter y pack. Refer to the
wiring diagram on page 11.
Failure Signs:
Char ger power LED does not go on. Batter ies will not char ge.
Tests:
Measure voltage acr oss (B
-
) a black wire and (B+) a red wire on the controller (4) battery terminals.
While observing the voltage reading, plug the charger into the wall outlet and make sure the voltage reading increases.
Expected readings:
Battery voltage (24
-
29VDC) first, approximately 29 volts when fully charged. Also, refer to the
charger test on page 13. Test charger harness and fuse for continuity.
Serviceable:
Replace if necessar y
.
Only use the charge that was supplied with the scooter. The charger was specifically
designed and tested for the product it came with.
Summary of Contents for Buzzaround Carry On
Page 2: ...2 ...
