![background image](http://html.mh-extra.com/html/goldair/platinum-gpph610/platinum-gpph610_operating-instructions-manual_2239964018.webp)
Operating your Heater from the APP
Mobile phone remote operation (connect heater
power and turn on the side switch, so that the
heater is in standby mode).
Open the “GOLDAIR" APP to select the heater
(when using one mobile phone to control multiple
heaters, you need to select the heater to be
operated).
•
Select the heater to be operated and enter the
operation interface.
If the phone interface color is dark red, this
indicates that the heater is in the OFF standby
setting.
•
Tap the OFF icon and the heater will turn on.
The display will change to bright red.
•
You can now control the heater.
•
To turn the heater off again tap the power icon
and the heater will revert to the dark screen.
TEMPERATURE SETTING:
•
Tap the "+" or "-" button to set the
temperature.
•
When the set temperature is higher than the
ambient temperature, the heater begins to
heat.
•
If the heater temperature setting is below
ambient temperature the heater will be in
standby mode and will not operate until the
ambient temperature drops below the set
temperature.
Depending on which mode you are in you can set
the temperature as below.
Comfort mode can be set from 5
–
35
o
C
Economy mode can be set from 5 - 31
o
C
(this is pre-set so there is always a 4
o
C difference
between Comfort and Economy settings)
LED Display Icon
Tap this icon to turn off the LED display on the
heater. This does not affect the operation of the
heater.
To turn the heater display back on, tap the icon
again
Dark Red
–
Heater Off
Bright Red
–
Heater On