![background image](http://html.mh-extra.com/html/goldair/platinum-gpph610/platinum-gpph610_operating-instructions-manual_2239964006.webp)
Before using this appliance, it must either be wall mounted or have the castor plates and
castors fitted.
This appliance has been supplied with
‘
1 way
screws’
for permanent installation of the
feet. This is a safety requirement for the New Zealand and Australian market.
Assembly Instructions
FREE STANDING
1.
Ensure the appliance is unplugged and power switches are off.
2.
Carefully turn the main body upside-down on a scratch-free and stable surface. Be
careful to prevent damage to the cosmetic finish or your floor surfacing.
3.
Align the screw hole on the Castor Wheel Bracket with the screw hole on the base of
the appliance.
4.
Attach Castor Wheel Bracket with the
‘
1 way
screws’
provided and ensure the
bracket sits firmly in place (do not over tighten). Firmly press Castor Wheels into
the slots provided on the Castor Wheel Bracket until they click into place. Some
force may be required.
5.
Set appliance upright.
NOTE: The wall bracket edges may be sharp. It is recommended that if using as a free
standing appliance please remove the wall bracket from the back of the heater.