Operating your Heater from the APP
Mobile phone remote operation (connect heater
power and turn on the side switch, so that the
heater is in standby mode).
Open the “GOLDAIR" APP to select the heater
(when using one mobile phone to control multiple
heaters, you need to select the heater to be
operated).
•
Select the heater to be operated and enter the
operation interface.
If the phone interface color is dark, this indicates
that the heater is in the OFF standby setting.
•
Tap the ‘Switch’ icon and the heater will turn
on.
The display will change to show the set
temperature and ambient temperature.
•
You can now control the heater.
•
To turn the heater off again tap the ‘Switch’
icon and the heater will revert to the dark
screen.
TEMPERATURE SETTING:
•
Tap the ‘+’ or ‘
-
’ button to set the temperature.
•
When the set temperature is higher than the
ambient temperature, the heater begins to
heat.
•
If the heater temperature setting is below
ambient temperature the heater will be in
standby mode and will not operate until the
ambient temperature drops below the set
temperature.
You can set the temperature from 10-49 degrees.
Dark
–
Heater Off
Bright
–
Heater On