U-PROX HW Installation manual
Features
Power:
o
External power supply
, 12V:
Current consumption max 150 mA @ 12V
Maximum voltage ripple 500 ma peak to peak
o
Micro USB B
standard power supply
Direct operation with U-Prox IP500 panels
o
ISM band (915.5-927.5 MHz) device with bi-directional communication
o
Guaranteed range of 20 m
o
U-Prox IC L connection interface – wireless computer network Wi-Fi
One micro USB B port for network settings configuring and firmware upgrade
Communication interface IEEE 802.11b/g/n (Open, WPA-PSK, WPA2-PSK)
Adjusted with U-Prox IP software. Supports automatic configuration for one-range network.
Overall dimensions of device enclosure – 120 х 40 х 355 mm
Temperature range: 0 - +55
0
C at 80.% relative humidity.
Maximum relative humidity 80% without condensation
Repeater
The look of the repeater is shown in Fig. 1
Fig. 1. U-Prox HW repeater
Location of connectors on repeater board and their function is shown in Fig. 2
Figure 2. U-Prox HW board
1.
The Enclosure
2.
Panel board
3.
Connectors
3
1
2
