![background image](http://html1.mh-extra.com/html/goldair/gcw300/gcw300_operating-instructions-manual_2240190014.webp)
Pairing APP to Heater
When the phone interface shows the addition is
successful, the WIFI indicator on the heater
will stop flashing.
The heater pairing is complete and the main
control screen on your phone will appear showing
the heater as ON.
If the phone and heater fail to connect, then you will need to try to connect again as per the above
process.
Choose/confirm which WiFi to connect to.
Note: your phone may pick up other WiFi signals
(e.g. neighbours) so you will need to choose.
Enter your WiFi
password and press ‘Confirm’
The phone will then connect to the heater.
Ensure you have a good strong signal from your
WiFi router.
Note: The WiFi indicator on the heater may go off
during this pairing process.
Once complete the screen showing the device has
been successfully added will appear.
Rename the heater if desired.
Tap ‘Completed’ to continue.