![background image](http://html1.mh-extra.com/html/goldair/gcw300/gcw300_operating-instructions-manual_2240190009.webp)
THERMOSTAT
To adjust temperature, press the
‘
-
’
or
‘+’
buttons to set the desired temperature from
10
℃
to 49
℃
When the temperature is 4 degrees or more below the set temperature, the heater will
operate in the HIGH heat setting. When the temperature is within 2 degrees of the set
temperature, the heater will reduce to the low heat setting.
When the temperature is 1 degree or more above the set temperature, the heater
elements will turn off and the heater will continue to blow room temperature air.
24 HOUR DELAY TIMER
The Timer function allows the heater to operate continuously from 1 - 24 hours before
automatically turning Off.
When the heater is ON, press the
’
24
H’
button and the heater will display 1.0 hours and
the
icon will be displayed.
By pressing the
’
24
H’
button again you can adjust the desired length of time in 1 hour
increments.
The Timer indicator will illuminate on the control panel.
To stop the Timer function, press
’
24
H’
button until 0.0 is displayed.
The OFF Timer can be operated in any mode.
When the heater is in STANDBY, press the
’
24
H’
button and the heater will display 1.0
hours and the
icon will be displayed.
By pressing the
’
24
H’
button again you can adjust the desired length of time in 1 hour
increments.
The Timer indicator will illuminate on the control panel.
To stop the Timer function, press
’
24
H’
button until 0.0 is displayed.
AUTO
In this function the open window icon
will be displayed. The heater will sense the
temperature in the room and if it drops more than 3 degrees in a minute it will turn the
heater off. If this happens, you will need to restart with the ON/OFF button.
CHILD LOCK
Press the LOCK button, the heater display lights will turn off (except the power light).
The child lock is active.
Press LOCK button again, the heater display lights will come on again.
The child lock is cancelled.
Operating Your Heater