Care and Cleaning
SUPPORT AND TECHNICAL ADVICE
Goldair
–
New Zealand
Monday
–
Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
–
Australia
Monday
–
Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
TECHNICAL SPECIFICATION
Model No:
GCV370
Supply:
230-240VAC 50/60Hz
Wattage:
2200W
CARE AND CLEANING
The appliance requires regular cleaning to ensure trouble free operation:
Unplug the appliance from the mains supply before cleaning.
Ensure that the appliance has been allowed to cool down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the appliance to remove dust and dirt.
Never use solutions such as benzene, thinners or polishing agents.
Use a vacuum cleaner to remove dust and fluff from around the grills.
Ensure the appliance is dry before plugging back into the mains supply.
Do not attempt to dismantle the Ceramic Heater. There are no user serviceable parts. For service or repair,
contact an authorised electrical service technician.
SAFETY DEVICES
This appliance has two protection devices:
1.
Resettable thermal link - this will automatically disconnect the power to the appliance at a pre-set
overheat temperature. After cooling down it will reset and power on again. If this occurs, investigate
what is causing the appliance to overheat.
2.
Thermal fuse - this disconnects the appliance permanently in case of overheating. (It is non resettable).
CAUTION: The appliance generates heat during use. Proper precautions must be taken to prevent the risk of
burns, scalds, fires or other damage to persons.
