WARNING: THIS IS A DOUBLE SIDED HEATER. Keep all objects at least 1 metre from the front, sides and
rear of the appliance.
WARNING: In order to avoid overheating or risk of fire, do not cover the heater.
WARNING: Never leave this appliance unattended when in use.
WARNING: Do not use this appliance with a programmer, remote-control system, separate timer or any
other device that switches the appliance on automatically.
Note: When the appliance is turned on for the first time, it may release a slight odour or smoke. This odour
or smoke is a normal occurrence caused by the initial heating of the internal heating elements and should
not occur again.
HEAT CONTROLS
Check that the Power Switch on the side of the heater is set to the Off position before plugging the heater in
and turning on the mains supply. Turn the Power Switch at the side of the heater to the
“I”
position. You will
hear a beep.
CONTROL PANEL
Press the On/Off button
“
20
”
to switch the appliance on. The display lights up.
The appliance is now ready for use and can be operated by means of the remote control or control panel
HEAT SETTINGS
The appliance has three heat settings: 900 watts, 1,300 watts & 2,200 watts
Press button
“
21
”
repeatedly until the desired heat setting is set.
Selected heating level is shown in the display.
Always choose a safe location for the appliance, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This appliance
requires no installation, it should be used solely as a portable appliance.
Operating your Appliance
11. Selected heating level display
12. Infrared reception
13. "Frost protection" symbol
14. Set temperature display
15. On/Off display
16. Increase temperature
17. Reduce temperature
18. Timer button
19. Running time display
20. On/Off button
21. Button for selecting the heat setting
