Components
ASSEMBLY
Before using the heater, the feet (supplied separately in the carton), must be fitted to the unit. The screw
pack to attach the feet to your heater will be taped to either one of the feet for your heater, or taped to the
plug.
Carefully turn the Main Body upside-down on a scratch-free and stable surface. Be careful to prevent
damage to the cosmetic finish or your floor surfacing.
Before the appliance can be used, the feet must be screwed on as follows:
1
Unpack the appliance from the packaging.
2
Remove the transport packaging.
3
Check that the appliance shows no signs of damage.
4
Slide the feet from the outside into the corresponding supports on the underside of the heater.
5
Secure the feet firmly using the screws supplied.
WARNING: Operate the heater in the normal upright position only with the feet attached to the
bottom. Any other position could create a hazardous situation.
1 Power cord
2 Control panel
3 Warning symbol -
“Do not cover”
4 Air outlet
5 Display
6 Air inlet
7 Feet
8 Temperature sensor
9 Mains switch
10 Handle
