49
Technical Data
Supply voltage:
11.0 – 28 VDC, 10.0 – 28
VAC. Can use Elsema DC or AC power supply,
12PP1000 or 24PP. 433.920 (Standard),
433.664, 433.408, 433.152 MHz.
433 MHz Frequencies:
Relay Output: Two relays rated at 8 amps
/240V each.
Recommended Antenna:
ANT433 series (433MHz Series)
Troubleshooting
The troubleshooting information is provided as
a reference when your reel is not functioning
correctly.
To ensure that you receive the best possible
service, it is recommended that you exhaust
all applicable troubleshooting solutions shown
prior to calling your dealer, or Goldacres, for
service advice.
Problem
Possible Cause
Possible Remedy
Reel does not wind
Hose jam
Unwind to clear jam
Overload fuse tripped
Press the Overload reset button
Fuse blown
Check/replace fuse
Loose connections
Check battery and connections
Manual Rewind switch faulty
Check manual switch
Loose/broken drive belt
Adjust or replace drive belt
Seized bearings on reel shaft
Replace bearings
Remote does not
operate at distance
Damaged aerial or lead
Repair or replace aerial or lead
Flat Battery
Replace battery
Remote not calibrated
with the receiver
Recalibration required
Refer to Calibration instructions
Faulty transmitter/receiver
Replace batteries
Replace Remote
Refer to Calibration instructions
Battery replaced in remote
Batteries are not correctly fitted
