Limitid indikator GWG - type GWD -issue 2
10 / 12
Part no. 15 382 57 b
Filling hole plug for limit indicator
Instead of the wall fitting, it is also possible to use a filling hole plug for limit
indicator type 906.
OPERATION
1. Using the connector, connect the limit indicator to the male contact of the overfill
prevention mechanism of the road tanker.
2. Fill the tank upon approval.
3. Upon completion of filling, fit back the cap of the connector.
TROUBLESHOOTING
Fault signal
Action
Road tanker does not
provide approval.
Check connector.
Check cable or replace the limit indicator.
MAINTAIN the sensor.
RESTORATION
If the actions described in TROUBLESHOOTING do not lead to a proper restart and if there is
no dimensioning problem, the product must be sent to the manufacturer to be checked. Our
warranty does not apply in cases of unauthorised interference.
MAINTENANCE
Upon proper ASSEMBLY and OPERATION, the product is maintenance-free.
Malfunctions and contamination of the sensor in the sensor
cover due to contaminated operating media.
Proper operation is no longer provided for.
Remove the limit indicator from the tank!
Perform a visual inspection
, sensor must be free!
Carefully clean the inside of the sensor cover with a brush and a cleaning
agent.
Install the limit indicator into the tank and repeat CONTROL.
DISPOSAL
To protect the environment, our electrical and electronic appliances may not
be disposed of along with household waste.
At the end of its lifespan, each end user is obligated to pass old appliances to a
district or area collection point, separate from household waste. This ensures that old
appliances are disposed of properly and negative effects on the environment are
avoided.
Our registration number for the electrical old appliances register (EAR) is:
WEEE-Reg.-No. DE 78472800.
TECHNICAL DATA
Ambient temperature
-25°C to +50°C