20
6. Plug the Cutter Cable Connector onto the
Cutter Connector.
7. Tie the cables with the secure locks, and
fix the locks into the Cable Configuration
Holes.
8. Screw the Cutter Cover onto the cutter kit.
9. Install the media into the printer (refer to 2-
1 for Ribbon Installation and 2-3 for Label
Installation). Close the Top Cover to
complete the cutter installation.
Note1: make sure printer is set to have the
cutter function on.
Note2: The label / paper used for cutting is
suggested to be at least 30mm in
height.
