15
4. When the USB device driver is assigned and
saved, click “Next”
5. The USB device is built on the serial port,
therefore make sure the interface setting is
specified to the assigned port.
6. Go to Control Panel\System\Device Manager
and the USB port will be listed under Ports
(COM & LPT). The example from the right
hand side indicates that the USB Serial Port
is COM3.
7. After the USB driver is installed, the USB
device can be used through software (such
as QLabel III or Godex drivers) to print
labels.
2-5. USB Uninstallation
To remove the USB driver, open “USB Driver”
folder and execute the “Ftdiunin” program, the
message box on the right hand side will appear.
Click “Continue” to remove the USB driver.
