Move the adjustable label guide on the right up to the label stock and secure the guide
with the
screw
. The label guides should hold the label stock securely without squashing
the liner. The labels should move through the feeder easily and without creasing.
Gently push the label stock to the feed point (first resistance felt).
Press the "Load / Unload" button. The printer will start to pull in the labels and feed
them up to the print position. The tension of the label stock indicates that the label
stock has been successfully loaded. The printer is now ready for operation.
Note: Alternatively, you can carry out the steps described here in the Toolbox. You can read about the
Toolbox functions in Section
4
of this user manual. However, inappropriate Toolbox settings may
interfere with the functions described here, so the printer may not respond as specified.
11
