8.
Auto cap timeout (sec):
The print head is closed automatically after 5 seconds in "Ready" status. You
can
edit this interval as required.
9.
Properties:
• AUTO LF:
With this option enabled, the printer will automatically carry out an LF
calibration before starting a print job.
With the option disabled, the calibration must be carried out manually when
the message "LF calibration error" is displayed.
We recommend leaving this option enabled.
• AUTO PPS:
With this option enabled, the printer will automatically adjust the distance
between the print head and the medium before starting a print job.
With the option disabled, the distance between the print head and the
medium is always the same.
• OVERSPRAY:
With this option disabled, the printer will only print to the bottom of the current
label if the print template is not within the scanned label height.
With the option enabled, the printer will print across the following gap if the print
template is not within the scanned label height.
• SLOW SWEEP:
With this option enabled (slow print mode), the print head will always print at
the same speed.
With the option disabled, the print head will print at different speeds,
depending on the print mode selected.
To confirm any changes made to options 1- 9, please make sure you click the
"Send settings to printer" button. Otherwise the printer will not apply these
settings!
15
