go sat GS 8010, User Manual

Page: 21 / 21

20
MPEG transport Stream A/V Decoding
Demultiplex According to ISO/IEC 13818-1(MPEG-2 system)
Input System Max. 90Mbit/s
Aspect Ratio 4:3(defauit), 16:9 letterbox
Video Decoding ISO/IEC 13818-2(MPEG-2 video) MP@HL, ISO/IEC 14496-10 HP@L4
Video Resolution 480p, 720p, 1080i
Audio Decoding ISO/IEC 13818-3(MPEG2 audio/MUSICAM), Dolby AC-3
Audio Mode Single Ch / Dual Ch, Stereo, Joint Stereo
Video Output HDMI/HDCP, RC
Microprocessor & Memories
Main Processor ARM926
CPU Clock 280MIPS
Flash Memory 4 Mbyte
SDRAM 160 Mbyte
EEPROM 32 Kbit
Data port (Option)
Connector 9 Pin D-Sub Type
Protocol RS232 Asynchronous
Data Rate Max. 19.2Kbps 115.2K
A/V output
Digital output HDMI/HDCP, YPbPr
Video RCA 1 output
Audio RCA 2 output
Digital Audio 1 optical output S/PDIF
Front Panel
VFD / LED Channel Number Display
8 Keys Power, Channel Down/up, Volume up/down, Menu, Exit, OK
USB USB 2.0 Host
Smart Card Slot 1 embedded slot ( Optional )
PCMCIA 2 Common Interface ( Optional )
Rear Panel
IF Input F-type Connector
IF Loopthrough output F-type Connector
6RCA Video, Audio L, Audio R, YPbPr Modulator F-type (Optional)
S/PDIF Optical
HDMI Type
A
RS232 Serial Port 9 Pin D-Sub Type
RF IN / OUT IEC-Type connector (optional)
e SATA Port For external e SATA HDD connection (optional)
Remote Control
Type IR Remote Control
Battery 2x1.5V AAA Type
Electrical and Mechanical
Input Voltage AC 90-250V, 50/60Hz
Power Consumption Max. 45 Watts
Size (WxDxH) 340 x 245 x 65mm
Weight 3 kg
All speci fi cations are subject to change without any notice.