go sat GS 8010, User Manual

Page: 14 / 21

2.2. DVB-T Setup (Option)
2.2.1. Automatic Scan
In the menu, You can set terrestrial channel automatically.
1) You can adjust the start & end freq by using ◄ / ► Key.
2) Press OK to start channel searching.
2.2.2. Manual Scan
Manual search is more convenient to search a speci fi c MUX. This menu
searches also all channels broadcasted over a speci fi c MUX using its
detected information.
1) Select “manual Scan” on terrestrial setup.
2) Adjust channel (MUX) by using
◄ / ► key.
3) Input by numeric keys. It has basic frequency on channel.
4) Select “Disable” or “Enable” of network scan by using
◄ / ► key.
5) Select 7 or 8MHz Bandwidth by using ◄ / ► Key.
6) Press the OK key to start channel searching.
2.2.3. Antenna Power
1) Select the „Antenna Power”.
2) You can switch the power supply On or Off.
2.3. Channel List
1) You can enter channel list by pressing OK key.
2) To watch another channel, move cursor to channel by using Page
UP/DOWN and press OK key.
3) If favorite channels are saved, the list is changed from channel list TV
to favorite list.
4) Press TV/RADIO key to go Radio CH list and exit from list by pressing
EXIT
key.
5) Red Button: If you press red button, you can sort channels by Satellite,
Alphabet,
CAS.
6) Green Button: If you press green button, you can fi nd channels
including the alphabet which you insert.
13