go sat GS 8010, User Manual

Page: 18 / 21

2.6. System Setup
2.6.1. System Information
Show model name, data and version of STB.
2.6.2. Factory Setting
Once Factory setting is selected and correct password is given by pressing 4-digit numeric keys followed by OK key, whole
parameters are changed to factory default. If you do not want to continue this mode, press EXIT key before you enter password
(factory default: 0000)
- Channel Data default setting
- All Data default setting
2.6.3. OTA Upgrade
2.7. USB Mode
WARNING! Please use USB Memory Stick Memory only. Don’t use any other product like USB Charger. Don’t use USB related
products which cannot meet DC5V, & Max .100mA.
1) After inserting USB Stick in Normal Video mode, USB menu will be displayed.
2) Flash ROM Writing
fi le is in Code Backup folder and CH Data is in Channel Data Backup folder.
3) Select Flash ROM Writing fi le and press ‚OK‘. API Code Transfer Menu is displayed and API Code Download is executed.
4) After Download is done, „Complete“ message is displayed and receiver start rebooting.
5) Select
fi le in CH Data folder and press ‚OK‘ key. Channel Data Transfer Menu is displayed and Channel Data download
is executed.
6) API Code and CH Data uploading is possible.
7) In API Code uploading API code is saved in Code Backup folder of USB and in Channel Data uploading Channel data
fi le
is save in Channel Data Backup folder of USB. Selected fi les (up to 20) will be played one by one.
17