38
Q-84
Select services require master code (0-1)
DEFAULT: Disabled (0)
The
SERVICES
button can be confi gured to require the use of the master code
to access Services.
• The default (0) disables the requirement for the Master
User Code to access the
SERVICES
menu.
• To require the use of the Master User Code to access
the
SERVICES
menu, select enabled (1).
When enabled then the Master User Code is required to access the Services and
the Z-wave device confi gurations. This keeps unauthorized users from being able
to change Z-wave settings, such as temperature, lights and locks.
Q-85
Select master user access to zwave toolbox (0-1)
DEFAULT: Disabled (0)
The Z-Wave Toolbox menu can be set to require the use of the Master User Code
or the Installer Code. By default, the Installer Code is required for users to access
the Z-Wave Toolbox.
• The default (0) requires the use of the Installer Code to access the Z-Wave
Toolbox menu and all of its features, including the Advanced Toolbox.
• To require the use of the Master User Code or the Installer Code
to access the Z-Wave Toolbox menu, select enabled (1).
✓
NOTE: When enabled (1) the Installer code will still be required
to access the Advanced Toolbox menu. This prevents end
users from adding or removing Z-Wave devices.
Q-86
Select disable siren after two-way audio (0-1)
DEFAULT: Disabled (0)
This setting enhances system operation in personal emergency applications and
also provides the dealer with the option of the siren sounding until the bell cut off
or to the end of a two-way-voice session.
• The default (0) will cause the siren to resume after two-way
audio (if the bell cut off timer has not expired).
• Enable (1) will cause the siren to shut off after a two-way audio session.
Installer Programming