English
27
(Syncrus GLF OPTI and GLC OPTI Delivery unit)
- Power cut.
- Chair’s fuse burned.
- Equipment’s not working.
- Check power supply.
- Replace chair’s fuse
- Resin is not appropriate for
LED’s photopolymerizer wave
length range
- Equipment is not
polymerizing resins.
- Get the indicated resin for the
photopolymerizer ’s wave
length range, one with
contains photoinitiators based
on camphor-quinone.
TROUBLESHOOTING
Problem
Probable cause
Solution
Scaler
(Syncrus GLXF FULL, GLXC FULL, GLXF, GLXC, GLF SONIC and GLC SONIC Delivery Units)
Check Scaler owner’s manual
FINAL CONSIDERATIONS
The most important aspect related to equipment care is that concerning spare parts.
To guarantee the life span of your equipment, use only
original Gnatus spare parts
. They are sure
to follow the technical specifications and standards required by Gnatus.
We must also point out to you our chain of authorized dealers. Only dealers that make part of this
chain will be able to keep your equipment constantly new for they count on technical assistants who have
been trained and on spedific tools for the correct maintenance of your equipment.
Doubts and information: GNATUS Call center (55-16) 2102-5000.
ATTENTION:
Any other problem that could happen with its equipment, should only be repaired by an authorized
technician Gnatus.
The bad use, negligence or maintenance not made by technician authorized by the maker, will imply
in the loss of the warranty.
Optilight LD
Summary of Contents for Consola Syncrus GL FO
Page 1: ......
