24
MAINTENANCE
46
50
Adjustment of the balance point of the
Delivery Unit
(Syncrus GLXF FULL, GLXF, GLF SONIC,
GLF JET, GLF OPTI and GLF Delivery Units)
Remove the cover (46) of the arm, and with the
aid of a key allen 7/32" (50), press or loosen the
adjustment screw to reach the balance point.
Cleaning
Reservoirs
It’s highly recommended the cleaning of the
water reservoirs (43, 44 and 45), using chlorinated
water solution 1:500 (as described previously)
Bio-System
Remove hanpieces from terminals. Take
terminals to bowl or water unit’s sink.
Open the terminal’s spray valves completelly.
Press the Bio-system key (30), which is located
in the command panel (see page 55), for some
seconds, to disinfect the equipment’s components
internally with disinfectant.
Then, press the command pedal for some
seconds to rinse, in order to eliminate the disinfectant
residues that could have remained.
IMPORTANT:
Repeat this procedure before working day and
after each patient.
Bicarbonate Jet
(Syncrus GLXF FULL, GLXC FULL, GLXF, GLXC, GLF JET and GLC JET Delivery Units)
Avoid leaving sodium bicarbonate on the
reservoir for long periods without using it. The air
humidity could change the powder properties and
cause a blockage.
If this happens, proceed as follows: find the
bicarbonate container (51), remove it unscrewing it
clockwise and, using a dry piece of cloth, clean it.
Check the thread is free from powder and put it back
screwing it counter-clockwise.
The Delivery Units with bicarbonate jet features
an unpressuring, hose and handpiece internal
cleaning automatic system.
When pedal is loosed, an internal air jet will clean
the system. If the system were clogged, proceed as
follows:
51
Summary of Contents for Consola Syncrus GL FO
Page 1: ......
