20
OPERATION
Command panel
27 - Scaling function operation (available in the
GLXF FULL, GLXC FULL, GLXF, GLXC, GLF
SONIC and GLC SONIC Units).
28 - Endo function operation (available in the GLXF
FULL, GLXC FULL, GLXF, GLXC, GLF SONIC
and GLC SONIC Units).
29 - Perio function operation (available in the GLXF
FULL, GLXC FULL, GLXF, GLXC, GLF SONIC
and GLC SONIC units).
30 - Bio-System operation
31 - X ray view operation
32 - Last position / Spitting position
33 - Cup filling
34 - Bowl’s water flow
35 - Rise seat.
36 - Lower seat.
37 - Emergency stop.
38 - Rise backrest.
39 - Lower backrest.
Warning:
To preset the cup filling time, press the “Cup filling” key (33) for 3 seconds (a long beep will be heard
and the LED will keep blinking).
When the desired time is reached, press the “Cup filling” key again. The cup filling time is then set.
To preset the bowl’s water flow, pres the “Bowl water” key (34) for 3 seconds (a long beep will be
heard and the LED will keep blinking)
When the desired time is reached, press the “Bowl water” key again. The cup filling time is then set
The “Cup filling” and “Bowl water” time functions have a limited preset flow time, 1 minute for the cup
filling and 4 minutes for the bowl’s water flow.
When the key “Last position/Spitting position” (32) is pressed, the dental light will go off (if it was on), the
bowl will drain (for the preset time, and if it was not programmed yet, for four minutes) and the backrest will
go up to the spitting position. When pressed again, the backrest will return to the last position and the dental
light will go on (if it was on).
After pressing the “Last position/spitting position” key (32), any other operation will trigger the “Stop”,
and automatically the backrest current position will be defined as “Last position”.
When the “Emergency stop” (21) key is pressed, all chair movements are interrupted and blocked until
pressed again.
27
28 29
30
31
32
34
33
35
38
37
39
36
Summary of Contents for Consola Syncrus GL FO
Page 1: ......
