HOW TO USE CONTROL PANEL
☞ Sub-Screen 1 : To check cylinders & motors operation status manually.
① PRESS
: Display operation status of MAIN ROLLER.
Press SPEED button to operate it manually.
② STOPPER
: Display operation status of STOPPER.
Press MAIN SCREEN MODE button to operate it manually.
③ BURST
: Display operation status of BURST. Press JOB button to operate it manually.
④ SHUTTER
: Display operation status of SHUTTER. Press TABLE UP button to operate it manually.
⑤ WHEEL
: Display operation status of WHEEL. Press TABLE DOWN button to operate it manually.
⑥ FD
: Display operation status of FEEDER MOTOR. Press MANUAL RUN button to operate it manually and speed also can be adjusted.
⑦ BT
: Display operation status of BURST MOTOR. Press BURST POSITION button to operate it manually.
DUAL(SINGLE) :
Display heater control status.
In case of 'DUAL', heating of top and bottom roller is available. But in case of 'SINGLE', only top heating is available.
⑧ TC
: Display TOTAL COUNTER.
1
2
3
4
5
6
7
8
15/60