How to laminate
3. Film Loading
1) Insert Loading paper
:
① Remove the protection cover
② Prepare a loading paper of 1m length and pass the paper through
the decurling bar and bring the paper out of the front part of slit module.
※ Please refer to Film loading to see how you can load the loading paper.
2) Loading bottom film
: Pass the Leading paper by following the below picture, stick it with bottom film, and tape is with loading paper
3) Loading Upper film
: Pass the upper film through the idle bar and tape it with loading paper and pull it from behind
untill the loading paper comes out.
※ To install upper film, please reffer to film loading.
[Put Leading Paper]
① Insert Leading Paper
② Attach the film to paper
③ Pull out the bottom film
④ tape the film to loading film
39/60
