HOW TO USE CONTROL PANEL
"SPEED"
To adjust setting value of laminating speed.
Speed Setting Range is Min. "1" ~ Max. "15".
To set up laminating speed.
Speed Setting : Press SPEED button and adjust speed with UP / DOWN buttons.
NOTE : Lamination q'ty is increased in proportion to increase of setting speed.
"PAPER LENGTH"
To set up substrate length.
Substrate Length Setting Range is Min. "250" ~ Max. "800".
NOTE : How to set substrate length is the same as how to set speed in "SPEED" menu.
It saves automatically 5 seconds after set up.
NOTE : The laminator has Underlap Cutting system. Then, setting value has to be shorter than substrate by 3~5mm.
"JOB"
To change JOBs.
There are 13 kinds of JOBs and temp. and substrate length for each mode can be saved separately.
NOTE : How to set substrate Burst Posion is the same as how to set speed in "SPEED" menu.
It saves automatically 5 seconds after set up.
CONTROL PANEL
17/60