ERROR MESSAGE
Message for STAND-BY status
STAND BY STATUS
Display FIGURE_W STAND BY
POWER OFF STATUS
Display FIGURE_X POWER OFF
Display of Stand-by Time
display the STAND-BY mode
- If laminating roller setting temp. and real temp. is higher than 80℃, but system is in stop status, the STAND BY time is measured.
2 hours are passed from the measured time, the machine is in STAND BY mode.
In the STAND BY mode, message of STAND BY STATUS is blinking on LCD PANEL.
- Release from STAND BY mode : Press RUN button in STAND BY mode.
Display of POWER OFF status
display the POWER OFF mode
- 1 hour is passed from the STAND BY mode, the machine is in POWER OFF mode.
In the POWER OFF mode, LCD Back Light is OFF. When the machine is back to normal mode, the LCD Back Light is ON.
- Release from POWER OFF mode : Press RUN button in POWER OFF mode.
25/60
