GMI D5037D, Instruction & Safety Manual

Page: 4 / 11

4
D5037 - SIL 2 Switch/Proximity Detector Repeater Transistor Out G.M. International ISM0270-3
Parameters Table
Must
be
Hazardous Area/
Hazardous Locations
Device Parameters
D5037 Associated
Apparatus Parameters
Must
be
Hazardous Area/
Hazardous Locations
Cable Parameters
Uo / Voc = 10.5 V
Ui / Vmax
In the system safety analysis, always check the Hazardous Area/Hazardous Locations devices to conform with the related system documentation, if the device is Intrinsically Safe check
its suitability for the Hazardous Area/Hazardous Locations and group encountered and that its maximum allowable voltage, current, power (Ui/Vmax, Ii/Imax, Pi/Pi) are not exceeded
by the safety parameters (Uo/Voc, Io/Isc, Po/Po) of the D5037 series Associated Apparatus connected to it. Also consider the maximum operating temperature of the field device,
check that added connecting cable and field device capacitance and inductance do not exceed the limits (Co/Ca, Lo/La, Lo/Ro) given in the Associated Apparatus parameters for the
effective group. See parameters indicated in the table below:
D5037 Terminals
Ch1
Ch2
7 - 8
9 - 10
Ch1
Ch2
7 - 8
9 - 10
Io / Isc = 22 mA
Ch1
Ch2
7 - 8
9 - 10
Po / Po = 56 mW
≤
Ii/ Imax
≤
Pi / Pi ≤
D5037 Terminals
D5037 Associated Apparatus
Parameters Cenelec (US)
Ci / Ci C cable ≥
Co / Ca = 2.41 µF
Co / Ca = 16.8 µF
Co / Ca = 75 µF
For installations in which both the Ci and Li of the Intrinsically Safe apparatus exceed 1 % of the Co and Lo parameters of the Associated Apparatus (excluding the cable),
then 50 % of Co and Lo parameters are applicable and shall not be exceeded
(50 % of the Co and Lo become the limits which must include the cable such that
Ci C cable ≤ 50 % of Co and Li L cable ≤ 50 % of Lo).
If the cable parameters are unknown, the following value may be used: Capacitance 180pF per meter (60pF per foot), Inductance 0.60µH per meter (0.20µH per foot).
Co / Ca = 66 µF
Co / Ca = 16.8 µF
I
IIIC (E, F, G)
Ch1
Ch2
7 - 8
9 - 10
Li / Li L cable ≥
IIC (A, B)
Lo / La = 78.3 mH
Lo / La = 313.4 mH
Lo / La = 626.9 mH
IIB (C)
IIA (D)
Lo / La = 1028.6 mH
Lo / La = 313.4 mH
I
IIIC (E, F, G)
Ch1
Ch2
7 - 8
9 - 10
Li / Ri device and
L cable / R cable
≥
IIC (A, B)
Lo / Ro = 635µH/ Ω
Lo / Ro = 2543 µH/ Ω
Lo / Ro = 5087 µH/ Ω
IIB (C)
IIA (D)
Lo / Ro = 8347 µH/ Ω
Lo / Ro = 2543 µH/ Ω
I
IIIC (E, F, G)
Ch1
Ch2
7 - 8
9 - 10
IIB (C)
IIA (D)
IIC (A, B)