2
D5037
- SIL 2 Switch/Proximity Detector Repeater Transistor Out
G.M. International ISM0270-3
General Description:
The single and dual channel Switch/Proximity Detector Repeater, D5037S and D5037D module is a unit suitable for applications requiring SIL 2 level (according to
IEC 61508:2010 Ed. 2) in safety related systems for high risk industries.
The unit can be configured for switch or proximity detector (EN60947-5-6, NAMUR), NO or NC and for NO or NC optocoupled open collector transistor output.
Each channel enables a Safe Area load to be controlled by a switch, or a proximity detector, located in Hazardous Area.
A fault detection circuit (DIP switch enabled) is available for both proximity sensor and switch equipped with end of line resistors. In case of fault, when enabled, it de-energizes the
corresponding output transistor and turns the fault LED on; when disabled the corresponding output transistor repeats the input line open or closed status as configured.
Mounting on standard DIN-Rail, with or without Power Bus, or on customized Termination Boards, in Safe Area or in Zone 2.
Functional Safety Management Certification:
G.M. International is certified by TUV to conform to IEC61508:2010 part 1 clauses 5-6 for safety related systems up to and included SIL3.
Technical Data
Characteristics
Supply:
24 Vdc nom (18 to 30 Vdc) reverse polarity protected, ripple within voltage limits
≤
5 Vpp, 2 A time lag fuse internally protected.
Current consumption @ 24 V:
22 mA for 2 channels D5037D, 12 mA for 1 channel D5037S with short circuit input and transistor closed, typical.
Power dissipation:
0.53 W for 2 channels D5037D, 0.30 W for 1 channel D5037S with 24 V supply voltage, short circuit input and transistor closed, typical.
Isolation (Test Voltage):
I.S. In/Out 1.5 kV; I.S. In/Supply 1.5 kV; I.S. In/ I.S In 500 V; Out/Supply 500 V; Out/Out 500 V.
Input switching current levels:
ON
≥
2.1 mA (1.9 to 6.2 mA range), OFF
≤
1.2 mA (0.4 to 1.3 mA range), switch current
≈
1.65 mA ± 0.2 mA hysteresis.
Fault current levels:
open fault
≤
0.2 mA, short fault
≥
6.8 mA.
Input equivalent source:
8 V 1 k
Ω
typical (8 V no load, 8 mA short circuit).
Output:
voltage free SPST optocoupled open-collector transistor.
Open-collector rating:
100 mA at 35 Vdc (
≤
1.5 V voltage drop).
Leakage current:
≤
50 µA at 35 Vdc.
Response time:
≤
100 µs.
Frequency response:
5 kHz maximum.
Compatibility:
CE mark compliant, conforms to Directive: 2014/34/EU ATEX, 2014/30/EU EMC, 2014/35/EU LVD, 2011/65/EU RoHS.
Environmental conditions:
Operating:
temperature limits – 40 to + 70 °C, relative humidity 95 %, up to 55 °C.
Storage:
temperature limits – 45 to + 80 °C.
Safety Description:
ATEX:
II 3(1)G Ex nA [ia Ga] IIC T4 Gc, II (1)D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I
IECEx:
Ex nA [ia Ga] IIC T4 Gc, [Ex ia Da] IIIC, [Ex ia Ma] I
UL:
NI / I / 2 / ABCD / T4, AIS / I, II, III / 1 / ABCDEFG, AEx nA [ia Ga] IIC T4 Gc
C-UL:
NI / I / 2 / ABCD / T4, AIS / I, II, III / 1 / ABCDEFG, Ex nA [ia Ga] IIC T4 Gc
EAC-EX:
2Ex nA [ia Ga] IIC T4 Gc X, [Ex ia Da] IIIC X, [Ex ia Ma] I X
UKR TR n. 898:
2ExnAiaIICT4 X, ExiaI X
associated apparatus and non-sparking electrical equipment.
Uo/Voc = 10.5 V, Io/Isc = 22 mA, Po/Po = 56 mW at terminals 7-8, 9-10.
Um = 250 Vrms, -40 °C
≤
Ta
≤
70 °C.
Approvals:
BVS
10 ATEX E 113 X conforms to EN60079-0, EN60079-11, EN60079-15,
IECEx BVS 10.0072X conforms to IEC60079-0, IEC60079-11, IEC60079-15,
UL & C-UL E222308 conforms to UL913, UL 60079-0, UL60079-11, UL60079-15,
ANSI/ISA 12.12.01 for UL and CSA-C22.2 No.157-92, CSA-E60079-0, CSA-E60079-11, CSA-C22.2 No. 213 and CSA-E60079-15 for C-UL.
C-IT.ME62.B.04182 conforms to GOST R IEC 60079-0,GOST R IEC 60079-11, GOST R IEC 60079-15.
C
Ц
16.0036 X conforms to
ДСТУ
7113,
ГОСТ
22782.5-78,
ДСТУ
I
ЕС
60079-15.
TÜV Certificate No. C-IS-236198-04, SIL 2 conforms to IEC61508:2010 Ed. 2.
TÜV Certificate No. C-IS-236198-09, SIL 3 Functional Safety Certificate conforms to IEC61508:2010 Ed.2, for Management of Functional Safety.
Mounting:
T35 DIN-Rail according to EN50022, with or without Power Bus or on customized Termination Board.
Weight:
about 125 g D5037D, 110 g D5037S.
Connection:
by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm
2
.
Location:
installation in Safe Area or Zone 2, Group IIC T4.
Protection class:
IP 20.
Dimensions:
Width 12.5 mm, Depth 123 mm, Height 120 mm.
FSM
SIL 3
