Electrical System
4.2-7 No lower from base controls
Section 4 - Troubleshooting Information
1. Loose or broken wire from lift/lower switch SA2 to
TS200 machine controller pin p12_5
Check continuity. Replace if defective.
2. Open or defective lift/lower switch SA2
4.2-8 No functions from platform controls
1. Open or defective Off/Platform/Base key switch
SA1
2. Loose or broken wire from Off/Platform/Base
key switch SA 1 to TS200 machine controller pin
P15-1
3. Loose or broken 24V- wire from Platform joystick
to 7S02 pin 4.
4. Loose or broken 24V- wire from connector 7S01
Pin 4 to 7P02 pin 4 (Base to platform control
cable)
5. Loose or broken 24V- wire from connector 7P01
Pin 4 to connector 8S02 pin 3.
6. Loose or broken 24V- wire from connector 8P02
pin 3 to battery -
7. Loose or broken power wire from platform
emergency stop to platform control box joystick
8. Defective enable switch or wiring on platform
control box joystick
9. Loose or broken CAN H and/or CAN L wires from
Platform control box joystick to 7S02 pin 5 and 6.
10. Loose or broken CAN H and/or CAN L wires from
connector 7S01 Pins 5 and 6 to 7P02 pins 5 and
6 (Base to platform control cable)
11. Loose or broken CAN H and or CAN L wires from
connector 7P01 pins 5 and 6 to TS200 machine
controller CAN-1 and CAN-2 terminals.
12. Defective platform control box Joystick
4.2-9 No lift/lower from platform controls
1. Defective platform control box wiring, select
switches and/or Joystick
Replace if defective
Close switch. Replace if defective
Check continuity. Replace if defective.
Check continuity. Replace if defective.
Check continuity. Replace if defective.
Check continuity. Replace if defective.
Check continuity. Replace if defective.
Check continuity. Replace if defective.
Check wiring and switch. Repair or replace if
defective.
Check continuity. Replace if defective.
Check continuity. Replace if defective.
Check continuity. Replace if defective.
Replace if defective
check wiring and switches. Repair/Replace as
reuired.
43
1330ED
&
1530ED micro
GMG
Summary of Contents for 1330-ED
