Section 5 - Procedures
5.2 *.PGT Setting File Upload
Process
1. An EZCal Pro with a USB port is required to
enable the external * .pgt file to be transported
from a laptop/PC to the EZCal Pro
2. There needs to be a *.pgt file available for
upload that is applicable to the machine it is
being uploaded to.
3. USB read/write privilege is required on the PC/
Laptop in use.
4. Connect the EZCal Pro unit to the PC/laptop
that has the *.p t file intended for u load.
I
5. Upload *.pgt file onto the EZCal Pro (Note: do
not create folders - leave the file at the top level
of the EZCal directory).
6. Safely remove the EZCal from the USB port.
48
*.PGT Setting File Upload Process
7. On each machine that needs the settings
uploaded from the *.pgt file, plug the EZCal Pro
into the control board. The location of the EZCal
connector is at the bottom right of the control
board, circled in the following image. An EZCal
cable will be required.
1330ED
&
1530ED micro
GMG
Summary of Contents for 1330-ED
