18
Rev.2.13.A
- HEALTH
Step 1 - Area selection:
Using the P+ and P- buttons, place the cursor on the area you want to select. Press OK to
confirm.
Step 2 - Body part selection (only in the AESTHETIC-FITNESS area)
Using the P+ and P- buttons, select the body part you want to treat and confirm with OK.
Step 3 - Desired program selection
Select the desired program by using the P+ and P- buttons. Press OK to confirm.
How to execute and start a program
After selecting a program, the display shows the start screen where the following
elements are showed: the name, the symbol of mains supply (or the battery charge state,
if not connected to the mains), the total time, the duty cycle %, the frequency value of
the head and the emitted power value.
To start the program, press the OK button and regulate the output power (Watt) with the
Up and/or Down buttons.
How to pause the program
To pause the program, press the OK button, the power will zero. Time stops. Press OK
again to return to the execution of the program. During the pause the message PAUSE will
appear on the screen.
How to stop the program
To stop the program hold down the OK button until a beep is heard.
It appears the screen that asks for the releasing the OK button to turn off the device.
How to change the phase time
To activate the phase time modification press the * button and use the P+ o P- buttons.
After the regulation, press again the * button.
How to increase and decrease power
To activate the power modification press the UP/DOWN buttons.
Modifying the visualization of the power measurement unit
The device permits to visualize the power value emitted in two modalities:
1 - Watt
2 - Watt/cm2
To change the visualization press the Function fn button, while a program is executing.
