14
Rev.2.13.A
and wait for the red led to turn itself off. It is possible to continue the treatment by pressing
the OK button.
- If the Red led is still on after trying these 2 solutions, turn off the device and wait a few
more minutes. Turn on the device.
Is the red led still on?
NO. The problem is solved. Use the device as usual.
YES. Contact the service centers.
Luminous signals
On/off indicator
PAUSE indicator (during the treatment)
General error indicator. If the led turns on, check the connections between the
cables and the electrodes. If the led is still on, contact the service centers.
Power level indicator
MANDATORY BEHAVIOUR, WARNINGS AND CONTRAINDICATIONS
Mandatory behavior
For safety reasons, the device must be used in the prescribed manner and within the limits
of use explained in this manual.
The manufacturer declines any responsibility due to a different use from what it is
indicated in this manual.
No part of this manual (texts and/or photos) may be reproduced by electronic or
mechanical means without the prior written authorization of the manufacturer.
If the package, the cable or the connector of the power supply show signs of wear or
damage, replace it instantly.
The unit should be connected to the mains by its power supply. Before starting the
treatment, make sure that the power system specifications comply with the directives in
force within your country. Make sure that the power supply will be in a comfortable
position and that it will be easy to be removed.
