GLOBBER FLOW FOLDABLE 125, Owner'S Manual

Page: 7 / 68

During use :
- Standing on the scooter, with one hand on each handle, push with one of your feet to move
forward. Proceed with caution at the start.
- Shoes are mandatory and we strongly recommend wearing pants and long sleeve shirts to avoid
injury if you fall.
- The scooter does not include any headlights or lights. It is therefore not suitable for use at night or
during periods when visibility is limited.
DO NOT FORGET TO REGULARLY TIGHTEN THE DIRECTION BLOCKS TO AVOID
MISALIGNMENT OR LOSS OF THE SCREW.
Care / Maintenance: regular maintenance is a safety commitment;
-
Wheel bearings
: avoid going through water, oil or sand as this can damage wheel bearings. To
look after the wheel bearings, systematically check that the wheels turn properly by turning the
scooter upside-down and using your hand to spin the wheels. If the wheels do not spin they must
be removed to check their condition. First unscrew the wheel axle, remove the axle and detach
the wheel, then carefully push the two wheel bearings out of their housing. If they are chipped or
dented, new ones should be bought. If there is no visible damage, they must then be oiled. To do
this, remove all traces of grease, mud or dust with a kitchen towel or cloth, and re-oil them with a
grease spray or by leaving them to soak overnight in oil [turn them several times in the oil first].
Then reassemble the wheel bearings and axles, followed by the wheel, onto the scooter. Proceed
in the same manner for the other wheel.
- Wheels : the wheels wear down with time and can be pierced if overly used on rough surfaces.
The back wheel on which the brake is applied is particularly affected after several hours of braking.
In the interests of safety, they should be checked regularly and changed if necessary.
- Modifications : the original product must by no means be modified except for the maintenance-
related changes mentioned in these instructions.
- Nuts, axles and other self-locking fixings : these should also be checked regularly. They can
become loose after a while in which case they should be tightened. They can become worn and
not tighten properly, in which case they should be replaced.
- Reflective printing : Clean the reflective printing with a clean, lint-free cloth. Eventually, use a
glass cleaner.
DELUXE & ULTIMATE models
There are reflective stripes on the steering column to make the scooter visible at
night by reflecting on coming light when parked or being ridden.
DELUXE & ULTIMATE models possess a bell located on the side of the T-bar
handle opposite to the hand brake.
DELUXE & ULTIMATE models possess a hand brake located on the T-bar handle.
Pull back the brake lever slowly using your hand in a measured manner towards
you to slow down and/or stop.
- Barrel adjustment :
Fine tune the brake blocks by turning the barrel screw. To do so:
First undo the barrel-adjuster’s locknut (turn counter clockwise).
To move both brake blocks inward, unscrew the barrel in counter clockwise direction in small
increments.
To move both brake blocks outward, turn the barrel inward in clockwise direction in small
increments.
Check the feeling of the brake from time to time to get the fine adjustment right.
Tighten the barrel-adjuster’s locknut when done (turn clockwise).
Technical Specifications
MODEL NO.
ONE NL125 (475) /
ONE NL125 DELUXE (476)
ONE NL205 (477) /
ONE NL205 DELUXE (478)
ONE NL230 ULTIMATE (479)
AGE 8+ scooter Adult scooter Adult scooter
User height
From 1,20m (3’9’’) to
1,90m (6’2’’)
From 1,55m (5’1’’) to 2,0m (6’6’’) From 1,55m (5’1’’) to
2,0m (6’6’’)
T-bar height
From 89cm (35.04’’) to 99cm
(38.98’’)
From 101cm (39.76’’) to 111cm
(43.70’’)
From 107cm (42.13’’) to 117cm
(46.06’’)
Gross weight
3.9kgs
4.2kgs (DELUXE)
5.3kgs
5.6kgs (DELUXE)
6kgs
Additional Info
For questions and inquiries please contact us at: contact@globber.com
WARRANTY
The manufacturer warranties this product to be free of manufacturing defects for period of 93 days
from date of purchase. This limited Warranty does not cover normal wear and tear, tire, tube or
cables, or any damage, failure or loss caused by improper assembly, maintenance, or storage.
This Limited Warranty will be void if the product is ever
• used in a manner other than for recreation or transportation;
• modified in any way;
• rented
The manufacturer is not liable for incidental or consequential loss or damage due directly or
indirectly to the use of this product.
Globber does not offer an extended warranty. If you have purchased an extended warranty, it must
be honoured by the store at which it was purchased.
For your records, save your original sales receipt with this manual and write the product name
below.
………………………………………………………………………..
Spare parts
To order spare parts for this product, please visit our website www.globber.com
7
ENGLISH