9
2.9
Operating indications
The electric-hydraulic control unit has a plate, illustrated below, summarizing the
most important operating instructions and indicating what the operator must do
while running the LB.
OPERATING INSTRUCTIONS
Before using the lift, read the user’s manual carefully and check
it frequently.
The lift can only be used by specially trained, authorized
personnel.
Never use the lift for purposes other than those outlined in the
user’s manual.
Never allow anyone to climb onto the load or lift structure no
matter what condition it is in.
Make certain that the weight of the vehicle to be lifted and the
distribution of the load comply with the indications in the user’s
manual.
Never exceed the maximum rated capacity for the lift.
Make certain that the vehicle is stable on the support elements
before and during lifting operations.
Make certain that no conditions arise which could be hazardous
to persons or things while the lift is being raised or lowered.
When lowering, make certain that there is nothing in the
operating area which could prevent lift movement.
When running the unit, NEVER let anyone remain in the lift
operating area.
In case of breakdown, press the emergency (“mushroom-
shaped”) button on the remote control.
Before performing any maintenance on the lift, set the main
switch on the control panel to 0 (door lock).
Operations on the lift systems must only be performed by
professionally qualified personnel.
Tampering with the safety devices violates European safety
standards.
A41453/1.I
3
TECHNICAL DESCRIPTION
3.1
General information
The LB has been designed, created and built considering the operating needs of
the body shop working on motor vehicle sheet metal.
3.2
Identification of the parts
The location of the main parts of the LB are identified in the figure below:
Summary of Contents for Evolution
