35
NAT is short for Network Address Translation. The Network Address Translation Settings window allows you to share one WAN
IP address for multiple computers on your LAN.
Click
IP Address Mapping
in the left pane, the page shown in the following figure appears.
Entries in this table allow you to configure one IP pool for specified source IP address from LAN, so one packet whose source
IP is in range of the specified address will select one IP address from the pool for NAT.
DMZ Setting
Demilitarized Zone (DMZ) is used to provide Internet services without sacrificing unauthorized access to its local private
network. Typically, the DMZ host contains devices accessible to Internet traffic, such as web (HTTP) servers, FTP servers,
SMTP (e-mail) servers and DNS servers.
Click
DMZ Setting
in the left pane, the page shown in the following figure appears.
The following describes how to configure DMZ.
Step 6
Select
Enable DMZ
to enable this function.
Step 7
Enter an IP address of the DMZ host.
Step 8
Click
Apply Changes
to save the settings of this page temporarily.
