20
The following table describes the parameters of this page:
Field
Description
DHCP Mode
If set to
DHCP Server
, the router can assign IP
addresses, IP default gateway and DNS Servers to
the host in Windows95, Windows NT and other
operation systems that support the DHCP client.
IP Pool Range
It specifies the first and the last IP address in the IP
address pool. The router assigns IP address that is in
the IP pool range to the host.
Show Client
Click it, the
Active DHCP Client Table
appears. It
shows IP addresses assigned to clients.
Default Gateway
Enter the default gateway of the IP address pool.
Max Lease Time
The lease time determines the period that the host
retains the assigned IP addresses before the IP
addresses change.
Domain Name
Enter the domain name if you know. If you leave this
blank, the domain name obtained by DHCP from the
ISP is used. You must enter host name (system
name) on each individual PC. The domain name can
be assigned from the router through the DHCP
server.
DNS Servers
You can configure the DNS server ip addresses for
DNS Relay.
Set VendorClass
IP Range
Click it, the
Device IP Range Table
page appears.
You can configure the IP address range based on the
device type.
Click
Show Client
in the
DHCP Mode
page, the page shown in the following figure appears. You can view the IP address
assigned to each DHCP client.
The following table describes the parameters and buttons in this page:
Field
Description
IP Address
It displays the IP address assigned to the DHCP
client from the router.
MAC Address
It displays the MAC address of the DHCP client.
Each Ethernet device has a unique MAC address.
The MAC address is assigned at the factory and it
consists of six pairs of hexadecimal character, for
example, 00-A0-C5-00-02-12.
Expiry (s)
It displays the lease time. The lease time determines
the period that the host retains the assigned IP
addresses before the IP addresses change.
Refresh
Click it to refresh this page.
Close
Click it to close this page.
Click
Set Vendor Class IP Range
in the
DHCP Mode
page, the page as shown in the following figure appears. In this page,
you can configure the IP address range based on the device type.
