BL-GL22-1119 - 11-20-2019
5-3
1.
Remove the cap assembly as described in para-
graph
2.
Disconnect harness from potentiometer and
reversing switch.
3.
Remove two screws, two lock washers and two
flat washers.
WARNING:
When removing the control head in the
following steps, be sure to hold it in place
until the control harness is disconnected.
4.
Remove two screws, two washers and two flat
washers.
5.
Remove the control head and handle.
5-1.4. Control Head Installation
1.
Hold control head and handle in place and install
two screws, two washers and two flat washers.
2.
Install two screws, two lock washers and two flat
washers.
3.
Reconnect harness to potentiometer and revers-
ing switch.
4.
Install the cap assembly as described in para-
graph
5-1.5. Speed Potentiometer Replacement.
1.
Remove the cap assembly as described in para-
graph
2.
Disconnect harness from potentiometer.
3.
Remove screw, washer and control knob from
potentiometer.
4.
Remove screw, washer and control knob from
other side of potentiometer.
5.
Remove screw, lock washer and flat washer.
6.
Remove screw, lock washer and flat washer and
remove potentiometer from bracket.
7.
Position new potentiometer in bracket and secure
with screw, lock washer and flat washer.
8.
Install screw, lock washer and flat washer.
9.
Install control knob on potentiometer and secure
with screw, and washer.
10. Install control knob on the other side of potentiom-
eter and secure with screw, and washer.
11. Connect harness to potentiometer.
12. Install the cap assembly as described in para-
graph
5-1.6. Belly-Button Switch Replacement.
1.
Remove the cap assembly as described in para-
graph
2.
Disconnect harness from reversing switch.
3.
Remove screw, lock washer and flat washer.
4.
Remove screw, lock washer and flat washer and
remove switch assembly from bracket.
5.
Remove pin, bracket, and spring from button.
6.
Remove two pins and switch assembly from
bracket.
7.
Position the new switch assembly in bracket and
secure with two pins.
8.
Position bracket in button and install pin.
9.
Position switch assembly from bracket and secure
with screw, lock washer and flat washer.
10. Install screw, lock washer and flat washer.
11. Reconnect harness to reversing switch.
12. Install the cap assembly as described in para-
graph
Summary of Contents for 989021
