第 13 页 共 17 页
Battery pack discharge plug (Anderson 350A)
4.5.2 Press the "switch" when discharging, the switch power light will
light up, and the battery pack will start;
4.5.3 After the battery pack is started, various information of the battery
pack will be displayed on the battery pack display screen, such as:
battery pack voltage, temperature, etc.;
4.5.4 Start the vehicle and observe whether the battery pack display
information has warning information;
4.5.5 At the end of use, turn off the "switch", the switch power light goes
out, and the battery pack is turned off;
4.5.6 When the battery pack is not in use, be sure to turn off the battery
pack "switch" in time;
4.5.7 When charging, just insert the charging plug.
4.5.8 Precautions when installing the battery pack
：
•
Install the battery pack with the battery pack closed;
•
Please confirm whether the voltage model matches before installation, otherwise
the
battery pack may be damaged or a safety accident may occur;
•
Before installation, confirm whether the positive and negative poles of the battery
pack are
correct. Short-circuiting of the positive and negative poles is prohibited.
Short-circuiting the positive and negative poles may cause safety accidents;
4.6 Charger charging operation
