第 15 页 共 17 页
cleaned up before charging, otherwise it will cause poor contact between the
charging gun and the charging socket and cause heat or even fire;
•
Do not modify or disassemble the charging port and charging equipment, which
may cause charging failure and cause a fire;
•
After charging, do not disconnect the charging device with wet hands or standing in
water, as this may cause electric shock and personal injury;
•
If you need to end the charging during the charging process, please turn off the
"start switch" first. When the current drops to 0A, the charging plug-in can be
disconnected, otherwise the on-load cut-off will cause damage to the relay and burn
the plug-in terminal.
•
When the battery power is less than 20%, it should be recharged in time, and the
battery is strictly prohibited from over-discharge;
•
The battery should be charged in time after use, especially in a low temperature
environment, and the charge should be fully charged;
•
In order to avoid damage to the charging equipment, please pay attention to the
following items:
a) Do not pull or twist the charging cable;
b) Do not subject the charging equipment to impact;
c) Do not use the charging equipment in an environment with a temperature
higher
than 55
°
C;
d) It is forbidden to directly plug and unplug the charging plug-in when the
charging equipment has current output, which may cause electric
arcing,causing property damage and personal injury;
e) Do not place the charging equipment near heaters or other heat sources.
•
Note that the items not mentioned above are mainly safety.
V. Measures to deal with abnormal conditions