Global Payments LSK1500 User Manual Download Page 48

Page: 48 / 57

LSK 1500/1550 User Manual, March 2021

CONFIDENTIAL

EMV Card Reader

EMV Card Reader Problem

Diagnostics

Failure to open COM port (COM1)

1.  Check cable at rear of card reader for loose connection.
2.  Check power cable at SIC board for loose connection.
3.  Check data cable at PC rear (COM1).

Failure to read data from magnetic stripe
(Tracks 1, 2, 3)

Please call our 24/7 CAMS support desk (800-500-1973).

Failure to release card from its capture

Please call our 24/7 CAMS support desk (800-500-1973).

Receipt Printer

Receipt Printer Problem

Diagnostics

Failure to detect paper

1. Check the paper load sensor (A) to determine if the sensor is

displaced or dislocated from its mounting base.

2. Check the sensor cable to control board for loose connection.

Summary of Contents for LSK1500


























































Search results

Summary of Contents for LSK1500

Reviews:

Related manuals for LSK1500

Brands by name

Popular brands

Global Payments LSK1500, User Manual

Search results

Summary of Contents for LSK1500

Reviews:

Related manuals for LSK1500

Brands by name

Popular brands