Global Payments LSK1500 User Manual Download Page 45 | Manualshive

Page: 45 / 57

background image

LSK 1500/1550 User Manual, March 2021

43

© 2017 Global Payments Inc.

CONFIDENTIAL

Error Code

CDU Error Code Description and Diagnostics

1.  Check sensor (H) for blockage.
2.  Check to ensure sensor is working properly.
3.  Check cable from sensor to main B/D for damage or loose connector.
4.  Measure sensor voltage <transmitter normal range of 1~3V>.



Normal range of 50~250 mV at empty



Normal range of 2~5 V when blocked

5. Replace Inlet sensor when the voltage is not in the normal range.
6. Replace Main B/D.

C0070

4th cassette exit sensor (L) blocked after dispensing

1.  Check sensors RIGHT/LEFT for blockage.
2.  Check to ensure sensor is working properly.
3.  Check cable from sensor to main B/D for damage or loose connector.
4.  Measure sensor voltage <transmitter normal range of 1~3V>.



Normal range of 50~250 mV at empty



Normal range of 2~5 V when blocked

5. Replace Inlet sensor when the voltage is not in the normal range.
6. Replace main B/D.

C0072

4th cassette exit sensor (L) blocked

1.  Check sensors RIGHT/LEFT for any blockage.
2.  Check to ensure sensor is working properly.
3.  Check cable from sensor to main B/D for damage or loose connector.
4.  Measure sensor voltage <transmitter normal range of 1~3V>.



Normal range of 50~250 mV at empty



Normal range of 2~5 V when blocked

5. Replace Inlet sensor when the voltage is not in the normal range.
6. Replace main B/D.

C007A

Note from 4th CST not arriving at double timing sensor (H)

1.  Check sensor (H) for blockage.
2.  Check to ensure sensor is working properly.
3.  Check cable from sensor to main B/D for damage or loose connector.
4.  Measure sensor voltage <transmitter normal range of 1~3V>.



Normal range of 50~250 mV at empty



Normal range of 2~5 V when blocked

5. Replace Inlet sensor when the voltage is not in the normal range.
6. Replace Main B/D.

C007B

Sensor blocked during initialize

1. Measure sensor voltage <transmitter normal range of 1~3V>.



normal range of 50~250 mV at empty



normal range of 2~5 V when blocked

2. Replace sensor when the voltage is not in the normal range.
3. Replace Main B/D.

C007C

4th cassette failure to pick up

1.  Check note inside cassette for interference by foreign object.
2.  Check gears inside cassette for debris between gear teeth.
3.  Check rollers inside cassette for damage.
4.  Check push plate for interference.
5.  Check cassette exit path for blockage.
6.  Replace cassette.

C007D

4th cassette not detected

«
...
43
44
45
46
47
...
»

Summary of Contents for LSK1500


























































Reviews:

No comments

Related manuals for LSK1500

Brand: Olivetti Pages: 64

Brand: Seneca Pages: 4

Brand: Royal Sovereign Pages: 12

Brand: Kübler Pages: 20

Brand: Kubler Pages: 152

JetCount Series

Brand: CUMMINS ALLISON Pages: 3

Brand: Olivetti Pages: 3

Brand: casala Pages: 4

Brand: Kanomax Pages: 4

Brand: True Pages: 2

Brand: Contrel Pages: 12

Brand: Steinberg Systems Pages: 84

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands