gledhill PLATINUM D120, Instruction Manual

Page: 5 / 52

Page 5
Platinum Indirect
Platinum Indirect is an unvented hot water
storage cylinders with internal expansion,
and is provided with a high efficiency internal
primary coil which is designed for use with a
gas or oil boiler and is suitable for both open
vented and sealed pumped primary systems.
When used with a sealed heating system the
boiler must incorporate its own energy cut-out
overheat thermostat.
Platinum Indirect models are listed in Table 2
on Page 8 & 9.
Note:
The cold supply elbow c/w drain tapping
must be fitted as shown in figs 1 and 2. A
flexible hose can then be connected to the
drain tapping and, providing the hose runs
below the lowest level of the cylinder, then
all the water contents can be drained out
by syphonic action. (The cold feed pipe dips
internally to the base of the cylinder.)
Platinum
INDIRECT
Figure 2
DESIGN
DESCRIPTION