Elektro-Kit , electrical kit, kit électrique,
kit elettrico / für, for, pour, per
Castello M4, Palazzo M8/M16
10.2006-DEFI
5
4.
Work to be carried out by the customer
Provision of the electrical supply to the sunshade, including switch and fuse
Since the system is to be used in the open air, for safety reasons we recommend
the use of an earth leakage circuit breaker
Connection of the desired consumers in the sunshade to the electrical box in
accordance with the electrical circuit diagram. (Glatz original accessories such as
cable or heat transmission units are already installed)
Connection of the cable from the electrical kit with the cable from the house wiring
5.
Technical data for the electrical kit
Cable 7 x1.5 mm2
Max. continuous current load 13 A
Input supply voltage 400 V
The electrical box on the mast is splashproof and fitted with “Weidmüller” crimped
contacts. The earth contacts (green/yellow) are to be connected to the sunshade pole.
6. Electrical
circuit
diagram
The electrical circuit diagram can be found in the centre of these assembly and user
instructions
7.
Retrofitting the electrical kit
The electrical box is to be fitted on the pole below the light. To do this it will be
necessary to cut 2 threads in the pole. Take care to avoid damage to the inner
components and that no swarf falls inside the pole.
The cable is drawn to the top through the lighting. It then runs through the existing pole
profile channel (Palazzo M8 / M16). For the Castello, a cable sleeve must first be
pulled over the cable to provide protection. The lighting is now to be connected in the
electrical box (see electrical circuit diagram).
Retrofitting must always be carried out by a properly qualified electrician.
