Glas-Col Temp-O-Control TOT-1200, Operating Instructions Manual

Page: 2 / 15

2
SAFETY PRECAUTIONS
Warning!
This instrument contains hazardous operating voltages. Disconnect the unit from the
main power supply and the inputs when installing o avoid electrical shock.
Caution!

This instrument is designed for use at 120 VAC 50/60 Hz.

Avoid using this instrument in combustible or explosive gaseous atmospheres.

Avoid using this instrument in a corrosive environment.

Avoid exceeding the specified operating temperature. (See specifications.)

Avoid exceeding the specified maximum total electrical loading for this
instrument. (See specifications.)

Avoid installing the instruments where it is likely to come into contact with steam
or condensing vapors.

Avoid installing the instruments where it is likely to come into contact with
conductive dust and particles.

Replace the fuse only with a fuse of the same specified voltage, current and type
(See specifications.)

Use removable line cords with he same specification as the line cord supplied with
the instrument. (See specifications.)

It is always recommended that every lab temperature controller be used with an
independent high-temperature cut-off device such as an Over-Temp Probe.