Glas-Col Temp-O-Control TOT-1200 Operating Instructions Manual Download Page 14

 

14 

 
ERROR CODES 

 

 

 

 

 

Limited Warranty

 

 
Glas-Col warrants products of its manufacture to be free from defects in material and 
workmanship for one year and agrees to repair or replace without charge any products 
found defective upon examination at the factory.  With proper care and operation, Glas-
Col products will give long and efficient service.  Chemical spillage, overheating, 
overloading, and general misuse will greatly reduce the service life.  Glas-Col is not 
responsible for damage to apparatus due to improper installation or through attempts to 
operate the apparatus beyond its rated capacity, intentional or otherwise.  Normally 
expendable parts are not covered by this warranty. 
 

LIMITATION OF WARRANTIES

 

 
APART FROM SUCH WRITTEN STATEMENT OF WARRANTY, THERE ARE NO 
WARRANTIES, EXPRESSED, IMPLIED OR STATUTORY, WHICH EXTEND 
BEYOND THE DESCRIPTION OF THE PRODUCTS ON THE FACE HEREOF. 
 
Glas-Col products are intended only for legal and legitimate purposes in commercial 
laboratory and industrial settings. 
 
Glas-Col reserves the right to make product refinements without prior notice. 
 

Spare Parts 
 

Spare parts for Glas-Col shakers are generally available from the factory.  Consult Glas-
Col for part numbers and pricing. 

Summary of Contents for Temp-O-Control TOT-1200
















Reviews: